Mct 50

3 minds



various controls setup




The Powersaver Dual bridges the gap between the bulky, aged

electromechanical immersion controllers and the complicated ‘bells &

whistles’ digital versions.

A set of pre-selectable programs are there to chose from- covering all of the low rate electricity tariffs, including Economy 7, Economy 10 & Eco 20:20 times. Turn the Installer Switch to the program of choice (refer to Installation and User Instructions) and times will be set. The review button allows ON/OFF times to be checked & there is automatic GMT/BST changeover.

There is a ½ hour, 1 hour & 2 hour boost function with a digital display

countdown clock, allowing the user to clearly see boost times. There is also

a programmable boost function for further end user convenience; this

program is deliberately limited to a maximum of 2 hours, meaning expensive electricity is not being wasted during peak times.

Suitable for Single, Twin & Dual element immersion heaters.


Please refer to next page for set up Mct50 set up....

Independent timing. 5-wire installation. Override facility. Holiday mode. Automatic BST/GMT time change. Boost function. EN 60730-2-7.

 •24 Hour

 • 5 / 2 Day or 7 Day Programmable

 •3 Preset Programmes

 •Digital Display

 •2 or 3 On/Off Periods per Day

 •Suitable for Gravity-Fed & Fully Pumped Systems

 •5 Wire Installation

 •Backlit Display

 •Battery Back-Up

 •Energy Saving Trust Approved



Switching/contact rating: 3(1)A. H x W x D: 88 x 135 x 32mm. Backplate fit: British Gas Standard. Suitable for underfloor heating.